Support:Documents:Examples:Estimate Parametric Image with Matlab Distributed Computing Server

Estimation of Parametric Image using Matlab Distributed Computing Server (MDCS)

Overview

Generally, the estimation of kinetic parameters is performed by a ROI (region-of-interest)-based method. This means that time-activity curves (TACs) are generated by calculating mean activity from a user-defined ROI at each time point in a dynamic image data set. This method is simple and robust. However, it cannot represent physiological properties of the tissue, which is heterogeneous. For example, drawing a ROI in a tumor may include different tissue types, which have different biological properties. Therefore, a ROI-based method may fail to represent some significant characteristics of the tumor. One solution is to estimate kinetic parameters pixel-by-pixel method. This approach may generate several parametric images, and pixels value in each parametric image represents the value of a kinetic parameter. The generation of parametric images is time-consuming and the accuracy of parameter estimation is easily affected by image noise. To reduce the computational time, one alternate approach is to use parallel computing, which speeds up process of parameter estimation by using several computers or multiple CPUs. This example demonstrates how the MATLAB Distributed Computing Server (MDCS) can be used to reduce the time required for parameter estimation.

Setting Matlab Distributed Computing Server (MDCS)

To start the parallel computing, user should install MDCS as described in this document. Note: In order to use MDCS for COMKAT, users must have COMKAT folders with the same pathway in both the client and the cluster. Users could use funciton 'addpath' to add pathway for COMKAT folders.

Setting Up Client (User's Computer) for Matlab Distributed Computing

Step 4 of the customized document generated by clicking on the document link above gives details on how to set up the user's workstation. In brief, the steps for a Windows client are to click on the Parallel menu item (to the right of File, Edit, ... in the MATLAB window). If this is the first time you are using MATLAB Distributed Computing, click Manage. On the File menu, click New and select the desired jobmanager type. To use MATLAB's built-in manager, select jobmanager. Define name and other properties for the configuration including the Job manager host name (e.g. an IP address) and the job name manager. On the jobs tab, specify the maximum and minimum numbers of workers. Click OK/save.

Example of Parallel Computing using MDCS for COMKAT

After finishing the setting of MDCS, users could increase the number of workers to reduce the computational time of a pixel-wise parameter estimation. The maximum worker is the product of the number of computers and the number of CPUs per computer. To compare the computational time under different numbers of workers, we perform a pixel-wise estimation of FDG rate constants (k1~k4) for 128 x 128 pixels x 29 frames. This means that we estimate rate constants for 128 x 128 time-activity curves (TACs) and each TAC has 29 time frames. All data are generated from the FDG model (following the step 1 and step 2). The below example includes six different tests: 1, 2, 4, 8, 16 and 32 workers. In each test, we run five trials and calculate mean computational time from these five trials.

Step 1. This part is to create a ¹⁸F-FDG model by using COMKAT commands. The basic commands can be found in the user manual and the overview of the ¹⁸F-FDG model can be found in the example.

cm = compartmentModel;  % start with a new, empty model

%        k1     k2      k3     k4
ktrueA=[0.1 ;  0.13 ; 0.06 ; 0.0068];
 
% define the parameters
cm = addParameter(cm, 'sa',    1);                 % specific activity of injection, kBq/pmol
cm = addParameter(cm, 'dk',    log(2)/109.8); % radioactive decay
cm = addParameter(cm, 'PV',    1);                 % (none)
 
cm = addParameter(cm, 'k1',    0.1);              % 1/min
cm = addParameter(cm, 'k2',    0.13);            % 1/min
cm = addParameter(cm, 'k3',    0.06);            % ml/(pmol*min)
cm = addParameter(cm, 'k4',    0.0068);        % 1/min
 
% define input function parameter vector
cm = addParameter(cm, 'pin', [28; 0.75; 0.70; 4.134; 0.1191; 0.01043]);

% define compartments
cm = addCompartment(cm, 'Junk');
cm = addCompartment(cm, 'Ce' );
cm = addCompartment(cm, 'Cm' );

% define plasma input function
% specifying function as refCp with parameters pin
cm = addInput(cm, 'Cp', 'sa', 'dk', 'refCp', 'pin'); % plamsa pmol/ml

% connect inputs and compartments
cm = addLink(cm, 'L', 'Cp',  'Ce', 'k1');
cm = addLink(cm, 'K', 'Ce', 'Junk','k2');
cm = addLink(cm, 'K', 'Ce', 'Cm', 'k3');
cm = addLink(cm, 'K', 'Cm', 'Ce', 'k4');
 
% specify scan begin and end times
ttt=[ ones(6,1)*5/60; ...    %  6 frames x  5   sec
      ones(2,1)*15/60; ...    %  2 frames x 15   sec
      ones(6,1)*0.5;...         %  6 frames x  0.5 min
      ones(3,1)*2;...            %  3 frames x  2   min
      ones(2,1)*5;...            %  2 frames x  5   min
      ones(10,1)*10];          % 10 frames x 10   min

scant = [[0;cumsum(ttt(1:(length(ttt)-1)))] cumsum(ttt)];
cm = set(cm, 'ScanTime', scant);

% define an outputs, one for each region
cm = addOutput(cm, 'RegA', {'Ce', 'PV'; 'Cm', 'PV'}, {});
 
% solve model and generate example output
[PET, PETindex]=solve(cm);

data = PET(:,3);  % data will have 3 columns, one for each region
 
% specify parameters to be adjusted in fitting
cm = addSensitivity(cm, 'pin', 'k1', 'k2', 'k3', 'k4');
 
% set parameter values initial guess, lower and upper bounds.  values are in same order as sensitivities
%        _____________pin_________________  ______Reg______    
pinit = [ 10; 0.4;  0.4;  3;  0.05; 0.01;   0.1;  0.1; 0.05; 0.001; ];
plb   = [ 10; 0.1;  0.1;  1;  0.05; 0.001;  1e-3; 1e-3; 1e-3 ; 1e-5];
pub  = [100; 2. ;  2. ; 10;  1.  ; 0.05;   1.;   1.;   1.;    1.;];

Step 2. Generate 128 x 128 noisy TACs by adding noise to the noise-free TAC.

noise_level = 0.1;
for i=1:128*128
    noisy_data(:,i) = [addNoiseDefault(data,noise_level,scant)];
end

Step 3. This part is to perform parameter estimation for 128 x 128 TACs using MDCS. Here, there are six different tests: 1, 2, 4, 8, 16 and 32 workers. For each test, we run five trials (test_idx) and then calculate mean computational time from these five trials. Before fitting the noisy TACs, users must use the Matlab function 'matlabpool' to start parallel language worker pool. The value in function 'matlabpool' indicates the number of workers used in the test. To use parallel computing for fitting all TACs , the 'for' loop is replaced by the 'parfor' loop. Note: users should use Matlab command 'matlabpool close' to close matlabpool after each test.

for pool_idx =1:6
    
    % run the computation using 32 workers, then 16 workers,..., then 1 worker
    mat_pool_n = [32 16 8 4 2 1]; 
    
    % run 5 trials for each test
    for test_idx = 1:5         

        % specify the number of workers to use in this test
        matlabpool(mat_pool_n(pool_idx));
        
        % add all required COMKAT m-files into the pathway
        addpath('D:\COMKAT_R3.1');
        addpath('D:\COMKAT_R3.1\utilities');
        addpath('D:\COMKAT_R3.1\validation');

        t0 = clock;
        for_times = 128*128;

       % use 'parfor' to perform parallel computing for 128x128 noisy data
        parfor i=1:for_times 

            % set the data, which will be fitted and use COMKAT's function 'fit' to fit the data
            cm2 = set(cm, 'ExperimentalData', noisy_data(:,i));
            pfit(:,i) = fit(cm2, pinit, plb, pub);

        end

        time_consumed_parfor(pool_idx,test_idx) = etime(clock,t0);

        matlabpool close;

    end
end

Step. 4 The below figure is the computational time (minute) versus the number of workers. As we expected, the computational time of the pixel-wise parameter estimation reduces with the increase of the number of workers.

for i=1:6
   % calculate mean computational time of 5 trials for each test and convert time from second to minute
   mean_time(i)=mean(time_consumed_parfor(i,:))/60;
end

bar(mean_time);

set(gca,'XTickLabel',[1 2 4 8 16 32]);

xlabel('# of workers');

ylabel('Computational time (minute)');